General Pumps Industrial Grade Pump Oil - 2.5 Gallon
General Pump Industrial Oil is a premium multipurpose lubricant formulated to protect against rust and oxidation. It offers long service life and prevents sludge and varnish formation - even at high temperatures. General Pump Industrial Oil possesses a high natural viscosity index. This means more constant operating characteristics over a wide temperature range. Recommended for use in General Pump Industrial Pump crankcases. Initial oil change after break-in period between 50 and 100 hours. then every 3 months or 500 hours of operation thereafter. Check oil level in crankcase daily or before each use. Regular lubrication is the easiest, most efficient and least expensive element in preventive maintenance.
~Special anti-scuff and anti-wear agents extend the lives of gear, vane, radial piston and plunger pumps.
~Resists foaming and aeration which would result in erratic equipment operation and increased oil oxidation.
~Highly resistant to oxidation that would result in sludge formation.
~Resists formation of harmful oil water emulsions.
~Compatible with typically used seals and gaskets.
~High viscosity index (VI) means more constant operating characteristics over wide temperature ranges.
~Low pour point assures fluid flow during cold weather operation.
~Outstanding thermal and hydrolytic stability assures long oil life.
~Exceeds wear prevention requirements of all major hydraulic pump manufacturers.
Mfr Catalog No. 100450